Specialty Automotive Tools

Disc Brake Pad Spreader featuers heavy duty consturction Compresses inner brake pad Resets piston for easy pad replacement Manufacturer Part #44265

Disc Brake Piston Tool rotates and depresses caliper pistons back into caliper when changing brake pads For use with 3/8" drive tool Unique cube ...

The OEMTOOLS® Spark Plug Gap Gauge measures spark plug gaps from 0.020" to 0.100" (0.50 to 2.5 mm). A hole in the gauge works as an electrode adjus...

Trim Pad Remover easily removes door panel spring clips Helps prevent damage to door panel upholstery Easy grip handle Manufacturer Part #44313

The OEMTOOLS® Oxygen Sensor Socket removes and installs oxygen sensors on all domestic and imported computerized engine controlled vehicles with a ...

The OEMTOOLS® 32mm 1/2" Drive Axle Nut Socket removes and installs the front drive hub/axle nuts on 4 wheel drive and many front wheel drive automo...

Spark Plug Gapper is a rounge gauge with 6 precision wire sizes in inches and mm from 0.025 to 0.045 Included electrode adjuster Inch sizes stampe...

Battery Terminal Brush cleans battery posts and terminals of corrosive build up Internal and external wire brushes built into the rugged steel cas...

Parts Cleaning Brush is designed for cleaning automotive parts PVC bristles not affected by gasoline or solvents 10-1/2" overall length Profession...

Strut Spring Compressor is used to compress strut spring during cartridge replacement Forged hook Heat treated forcing screw Includes safety latch...

The Brake Bleeder Wrench is for bleeding air from brake cylinders with bleeder screws The metric two-sided tool allows easy access for 8 mm and 10...

Snap Ring Plier Set removes and installs both internal and external snap rings 4 jaws included: 90 degree, 45 degree, 2 straight Spring loaded han...

The OEMTOOLS® Vacuum Pump is ideal for many automotive applications such as tune-ups, diagnosis and testing, one man brake bleeding and liquid syph...

The OEMTOOLS® 36mm 1/2" Drive Axle Nut Socket removes and installs the front drive hub/axle nuts on 4 wheel drive and many front wheel drive automo...

The OEMTOOLS® Air Conditioning and Fuel Line Disconnect Tool easily disconnects air conditioning lines and quick connect fuel lines. A/C & Fuel...

Fuel Line Disconnect Tool releases 5/16" or 3/8" fuel line couplings found on GM, Ford, and Chrysler vehicles Scissor like design allows for easy,...

Feeler Gauge with blade protector has thumb notch to aid in removal of blades Hardened tempered steel blade Each blade laser etched with inches an...

The OEMTOOLS® Telescoping Magnetic Pocket Pick-Up Tool makes easy work of picking up hard to reach items. Extending over two feet and lifting over ...

Hook & Pick Set is used to pull O-rings, seals, cotter pins, and brushes Pick styles include: O-ring, 90°, straight, and hook Includes 8" (20 ...

Brake Spring Tool is designed to remove and replace brake shoe return springs Slotted arm guides the spring hook into position in the anchor hole ...

The Inner Tie Rod Tool is used to easily turn and remove the inner tie rod without removing the outer tie rod. Slide the tool over the end and tig...

Serpentine Belt Tool features a handle that has 3/8" square drive for those jobs requiring extra leverage Includes long handle and four shallow 13...

Bolt Extractor Set feature drill bits for left hand rotation 5 mechanic length's R.H. cobalt drill bits: 5/64", 7/64", 5/32", 1/4", 19/64 Includes...

The OEMTOOLS® Oil Pressure Switch Socket is ideal for the removal and installation of pressure sending units up to 2-5/8" long. Oil Pressure Switch...

Fuel Line Hose Clamp fits 1/4" to 1-1/4 Swivel head fits all angles SAE: 8 socket sizes in one tool: 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" ...

Hose Clamp Plier jaws swivel to access hose clamps in any position Services most ring-type or flat-band hose clamps Clamps are held open with a ra...

Brake Adjusting Tool features forged heat-treated and cadmium plated alloy steel Cuts tubing from 1/8" to 7/8" O.D. Lightweight for easy handling ...

The OEMTOOLS® Ball Joint Separator features heat treated heavy duty alloy steel and tapered fork wedge ends with a 15/16" opening. A long knurled h...

Telescoping Inspection Mirror is dsigned to inspect and view difficult to access areas Fully extends from 7-1/2" to 17 Mirrors are copper back wit...

Telescopicing Magnetic Pick Up Tool retrieves metal items from hard to reach areas Heavy duty magnetic tip lifts up to 8 lbs Extends to over 24" (...

Punch & Chisel Set features black oxide finish to resist rust Chrome vanadium for strength and durability Includes 5 tapered punches, 5 pin pu...

Tune Up Gauge Combo is great for measuring and setting gap widths 12 Steels blades sizes .010" (.254 mm) to .026" (.660 mm) 6 brass blades sizes ....

Engine Cylinder Hone for honing engine cylinder walls Spring Tension Adjusting Nut For Positive Cutting Action At All Speeds Range: 2" to 7" (51 m...

Crowfoot Oxygen Wrench for removal and installation of oxygen sensors in exhaust manifolds of 1981 and later model cars and trucks 1/2" drive 7/8"...

The OEMTOOLS® Steering Wheel Lock Remover is used to remove and install lock plate snap rings on steering wheel columns. The extended yoke services...

The OEMTOOLS® 3" 2/3 Jaw Puller enables you to remove and install parts for fast effective repairs. Features adjustable and reversible jaws with 2 ...

Pitman Arm Puller features yoke drop forged construction and heat treated for strength and durability 2-1/2" (63 mm) depth 1-5/16" (33 mm) yoke op...

Pulley Puller Installing Kit works on GM belt driven vacuum pumps and pressed on water pump pulleys of GM V6 Fits pulleys with hub diameters 1-1/8...

The OEMTOOLS® Four Claw Pick-Up Tool features a 4 prong claw for secure grasp and easy pick up. A flexible shaft allows for easy access in hard-to-...

The OEMTOOLS® Brake Spring Washer Tool is the perfect tool fitting both large and small washers! This Washer Tool removes and installs brake spring...

The OEMTOOLS® Steering Wheel Puller is designed to pull steering wheels on all major makes of automobiles. The set includes a puller, puller screws...

The OEMTOOLS® 6 and 12 Volt Circuit Tester features a super sharp probe with a 48" lead, power on and insulated clip. The inspection probe is set i...

Double Flaring Tool creates double or single flare in copper, aluminum, soft steel brake line and brass tubing Includes: five adapters 3/16", 1/4"...

The OEMTOOLS® Scissor-Style Air Conditioning/Fuel Line Disconnect Tool releases spring like couplings on fuel and air conditioning lines on most Fo...

Nut Splitting Tool has a chrome plated body for easy cleanup Hardened cutting jaws for toughness Not for use with impact tools Manufacturer Part #...

Adjusting Brake Cylinder Hone controls pressure for faster, smoother honing action Range: 3/4" to 2-1/2" (19 mm to 64 mm) Includes 3 medium (22) g...

The OEMTOOLS® Mechanic's Stethoscope provides a fast and easy way to locate trouble in engines, bearings and other moving parts before too much dam...