How To Replace Car Starter on
Chevy Cavalier (2001-2003)

With winter kicking into high gear, it's critical that your vehicle is ready to go when you are. Rest assured that your car will turn on during these cold Canadian winters with a "how to" starter replacement.

This month the Parts Pros have provided the necessary steps on how to change or replace your Chevy Cavalier's car starter. We have everything listed below from the parts & tools required to the actual removal & installation of a car starter for all 2001-2003 models including your Chevrolet Cavalier Z24 or LS.

Contact your PartSource Parts Pros to help.

Every vehicle is different, so when it comes to maintenance and repairs, always follow the vehicle's owner's manual. Don't work with a Philips when it calls for flat. Substituting tools can compromise your safety or your vehicle's performance.

Safety should be your number one priority, so don't smoke, drink alcoholic beverages, or wear a necktie. And watch out for hot objects, sharp instruments, hazardous materials and other potential safety hazards in and around your workspace.

And finally, when the fun turns to frustration or if the job requires specialized knowledge beyond your abilities, seek the assistance of a Parts Pro, professional mechanic or installer. The last thing we want is someone getting hurt.

Starter Removal (2.2L)
	Disconnect the negative battery cable
	Raise and support the car with jack stands
	Remove the flywheel access cover
	Disconnect the starter solenoid wiring
	Remove the starter mounting bolts
	Remove the starter assembly
	Remove the starter shims and note their placement for reassembly (if equipped)
Back to top

Starter Removal (2.4L)
	Disconnect the negative battery cable
	Remove the air duct to throttle body
	Remove the top mounting starter bolt
	Raise and support the car with jack stands
	Remove the lower mounting starter bolt
	Move the engine wiring harness to the side (out of the way)
	Disconnect the starter solenoid wiring
	Remove the starter assembly
	Remove the starter shims and note their placement for reassembly (if equipped)
Back to top

Starter Installation (2.2L & 2.4L)
	Position starter shims in the same spot (if equipped)
	Install starter assembly
	Install starter mounting bolts
	Install starter solenoid wiring harness
	Remove jack stands and lower the vehicle
	On the 2.4L engine model install the top mounting starter bolt
	& the air intake duct to throttle body
	Reconnect the negative battery cable
Back to top

While you are at replacing your Chevy Cavalier's car starter:

• Good idea to clean your battery terminal connectors